Innovente® Asia Pacific Pte. Ltd.
No. 58 Kian Teck Road,
Singapore 628792
Telephone: +65 6383 0600
  • Overview
  • Products & Systems
  • References
 

Waterproofing Systems

Water causes the greatest amount of remedial and maintenance costs in buildings and structures, if the correct preventative structural water proofing measures are not designed into and installed, during the actual construction phase of the project.

Innovente is well placed to provide advice, recommend specialist systems and carryout the application of a wide range of preventative water proofing products.

From the initial design phase, through the foundation construction concluding with the wall and roof water proofing, the company is able to provide the Developer with an opportunity to reduce the maintenance costs associated with subsequent water damage, from the ground up or the roof down.

Waterproofing Systems

The degree of dryness achieved in a construction projects has a lot to do with the waterproofing system used. Innovente specialise in market leading Waterproofing Systems for the construction industry by ensuring the way the product is professionally applied results in maximum water protection reliability. Innovente are able to supply and apply solutions uniquely designed to meet the requirements and demands of all types of projects no matter how complex.


Dry Plus by Weber
Cementitious Waterproofing Mortar - Dry Plus is a preblended, single-component, cementitious mortar suitable for use on concrete, and cement renders. It penetrates into the substrate and crystallises, blocking the passage of water. Dry Plus is suitable for use on wet, horizontal and vertical, internal and external surfaces, subject to positive or negative water pressures.

EBit W by Innovente
Low VOC Water-based Epoxy Bitumen Coating - Ebit-W is a 2 components, low V.O.C. water-based epoxy with bitumen extender designed as an anticorrosion coating over various types of substrate.

EMA by Isothane
Elastomeric Waterproofing - EMA elastomeric membrane is a liquid applied coating based on urethane prepolymers which cures by reaction with atmospheric moisture to give a continuous film which is rubbery and elastic. It contains leafing aluminium which gives excellent U.V. resistance.

EMB-waterproofing system by Isothane
Elastomeric Waterproofing - EMB elastomeric membrane is a liquid applied coating based on polyurethane prepolymers extended with tar, which cures by reaction with atmospheric moisture to give a continuous film that is rubber-like and elastic.

Integritank by Stirling Lloyd Polychem
MMA Lining

Joint Wide Flex by Weber
A Wide-joint, Mould Resistant, Flexible Tile Grout - Joint Wide Flex is a wide-joint, cement-based, flexible tile grout for interior and exterior use in situations where some movement or vibration is expected. It can be used for grouting ceramic, porcelain, mosaic, quarry, natural stone, terrazzo and terracotta tiles and brick slips.

Set SPF by Weber
Cement-based Polymer-modified Tile Adhesive - it is a flexible, cement based tile adhesive for internal and external use. Suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in areas that will be dry or wet, including swimming pools. It is particularly suited for situations where some movement, deflection or limited shrinkage is likely. Available in grey or white.

 

 

  

References - Waterproofing Systems

Marina Coastal Expressway C485

Mandai Newater Plant

Changi Water Reclamation Plant

Doha North Waste Water Treatment Plant